SPP drop targets are too generous

I have more or less finished a shop job on my Simpsons Pinball Party over six years in the waiting. One problem that I have been frustrated with was the drop target bank got confused sometimes and would award “drops completed” several times. Careful observation over an extended period of procrastination and play revealed that the middle target seemed to be at fault.

I actually went as far as buying some new microswitches, just in case one was flaky. Then I remembered to always look for a bad connection first.

The diodes on these switches are mounted on a terminal strip a few inches from the drops. I thought for sure one would be cracked, but they looked fine.

So I pulled the drop target bank out of the game, and one of the QD connectors fell off of its switch lug. I used pliers to squish the switch a little bit together and slid it back on. So far so good!